Huawei FusionModule2000-S User Manual page 270

FusionModule2000-S Smart Modular Data Center
User Manual
Figure 6-24 Removing a T/H sensor
Before installing the new T/H sensor, check that its DIP switch settings are consistent with the
DIP switch settings of the old T/H sensor.
Step 4 Connect cable terminals to RS485_IN and RS485_OUT ports, and install the new
T/H sensor in the correct position.
Issue 03 (2021-07-15)
NO TE
Copyright © Huawei Technologies Co., Ltd.
6 Operation and Maintenance
261