Table of Contents
Advertisement
FusionModule2000-S Smart Modular Data Center
User Manual
3.
Step 3 Use a right angle to position the end cabinet base, and ensure that the outline of
the upper surface of the base aligns with the cabinet bottom outline on the floor.
Figure 3-9 Positioning the first base
Step 4 Use the end cabinet base as the reference and place other cabinet bases.
Issue 03 (2021-07-15)
Figure 3-8 Assembling a base
Assemble the telescopic rod and the base, and then tighten the bolt assembly.
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Installation
31
Advertisement
Table of Contents
