Table of Contents
Advertisement
FusionModule2000-S Smart Modular Data Center
User Manual
Context
This section describes how to install and commission a camera. Two persons are
required for the commissioning.
Install the camera in front of the cabinet at the head of a row to ensure that the
camera can monitor the entire front area of the smart module.
Procedure
Step 1 Align the mounting holes in the dome camera base with those in the mounting
plate, and screw the camera to the mounting plate, as shown in
Figure 3-98 Installing a camera
Figure 3-99 Triple-axis adjustment
Issue 03 (2021-07-15)
NO TE
For details about how to install a camera, see the documents delivered with it.
NO TE
This camera model has triple-axis adjustment design. Connect the auxiliary video cable
delivered with the camera to a display device such as the monitor. Rotate the camera 0–355
degrees horizontally, 0–75 degrees vertically, or 0–355 degrees in the revolving direction to
achieve an appropriate angle.
Copyright © Huawei Technologies Co., Ltd.
Figure 3-99
shows the adjustment methods.
3 Hardware Installation
Figure
3-98.
85
Advertisement
Table of Contents
