Table of Contents
Advertisement
FusionModule2000-S Smart Modular Data Center
User Manual
● In ECC800 V100R002C10 and earlier versions, the default IP address for the
● The WAN1 port IP address cannot be set to an IP address in any of the
● IP addresses for the WAN1 and WAN2 ports should not be set in the same
● In some customized scenarios, the default IP address for the WAN2 port is
● The WAN port supports Internet access, and the LAN port supports LAN access.
Step 2 Configure the PC IP address and the WAN1 IP address in the same network
segment.
If the WAN1 port IP address is 192.168.8.10, subnet mask is 255.255.255.0, and
default gateway is 192.168.8.1, set the PC IP address to 192.168.8.12, subnet mask
to 255.255.255.0, and default gateway to 192.168.8.1.
Step 3 Set LAN parameters.
1.
2.
3.
4.
5.
Step 4 Set Internet Explorer parameters.
1.
2.
Issue 03 (2021-07-15)
NO TICE
WAN1 port is 192.168.1.10.
following network segments: 192.168.0.x, 192.168.245.x, 192.168.246.x and
192.168.248.x.
network segment.
192.168.248.10. The default value may vary.
Connect the PC network port to the WAN1 port or LAN port on the ECC800-Pro
based on the access network.
NO TE
● If the ECC800-Pro connects to a LAN and a proxy server has been selected, perform
3.3
and
Step
3.4.
● If the ECC800-Pro connects to the Internet, and the PC in a LAN accesses the Internet
over a proxy server, do not perform
access the ECC800-Pro.
Open the Internet Explorer and choose Tools > Internet Options.
Click the Advanced tab and select Use TLS1.1 and Use TLS1.2.
(Optional) Click the Connections tab and select LAN settings.
(Optional) Under Proxy server, deselect Use a proxy server for your LAN.
Click OK.
When you use Internet Explorer for access, set Internet Explorer to ensure the
normal display of and operations on the WebUI. Choose Tools >
Compatibility View, and add the web access address to the compatibility
view.
Choose Tools > Internet options > Security, choose Add the ECC800-Pro IP
address to the list of trusted sites.
Copyright © Huawei Technologies Co., Ltd.
6 Operation and Maintenance
Step 3.3
and
Step
3.4. Otherwise, you will fail to
Step
241
Advertisement
Table of Contents
