Huawei FusionModule2000-S User Manual page 116

FusionModule2000-S Smart Modular Data Center
User Manual
3.
4.
Issue 03 (2021-07-15)
Figure 4-6 Cutting off the excess part of a cable tie
Do not use cable ties at a place where the cables are bent. Otherwise, the
cable cores may break due to strong stress, as shown in
Figure 4-7 Binding cables in a bending area
Ensure that the cable ties are wrapped and secured in the same direction and
do not generate interference with subsequent operations, as shown in
4-8.
Copyright © Huawei Technologies Co., Ltd.
4 System Cabling
Figure 4-7.
Figure
107