Table of Contents
Advertisement
FusionModule2000-S Smart Modular Data Center
User Manual
Figure 3-74 Installing an ECC800-Pro
Step 4 (Optional) Take out the ECC800-Pro main control module and install the MicroSD
and SIM cards in the correct slots of the main control module as required.
1.
2.
3.
Issue 03 (2021-07-15)
Loosen the captive screws on both sides of the ECC800-Pro main control
module, pull the handles on both sides of the main control module, and take
out the module.
Figure 3-75 Removing an ECC800-Pro main control module
Insert the MicroSD and SIM cards into the correct slots on the left side of the
ECC800-Pro main control module.
Figure 3-76 Installing the MicroSD card and SIM card
Reinstall the ECC800-Pro main control module in the ECC800-Pro subrack, and
tighten the captive screws on both sides of the module.
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Installation
74
Advertisement
Table of Contents
