Table of Contents
Advertisement
FusionModule2000-S Smart Modular Data Center
User Manual
Step 3 Add cameras. For details, see the documentation delivered with the device or
obtain the documentation by referring to the "Reference Documentation" section.
View the corresponding section.
1.
2.
3.
4.
Issue 03 (2021-07-15)
NO TE
– If the iClient and IVS1800 are deployed in the same LAN, set Address to the
internal IP address of the IVS1800. If the iClient is installed on an external network
and the IVS1800 is deployed in the LAN, set Address to the external IP address of
the IVS1800.
– When the IVS1800 is added to the iClient by the admin user, the iClient checks
whether the login password of the admin user has been set. If the password is not
set, log in to the OMU portal to set the password.
– The iClient supports a maximum of 128 micro edge devices, and a maximum of 48
micro edge devices can be online at the same time.
– After logging in to the client, you may need to add more IVS1800 devices. You can
choose System Management > Devices to add, edit, or delete a device.
Choose System Management > Devices > Device Management > Micro
Edge on the iClient home page.
Right-click a device and choose Camera Access.
Figure 5-54 Camera access
Select Auto Batch Access and click Start.
Search for cameras by IP address.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
203
Advertisement
Table of Contents
