Table of Contents
Advertisement
FusionModule2000-S Smart Modular Data Center
User Manual
5.
6.
Step 5 Commission the cabinet electronic clasp locks.
Table 5-30 Function commissioning
Function
View
cabinet
electroni
c clasp
lock
informati
on
Change
a cabinet
electroni
c clasp
lock
name
Remotely
open a
cabinet
electroni
c clasp
lock
Open
cabinet
electroni
c clasp
locks in
batches
a: Cabinet electronic clasp lock 1 of IT cabinet 101 is used as an example.
Only IT cabinets support remote door opening and closing.
Issue 03 (2021-07-15)
–
If the connection is abnormal, check whether the device is properly
connected to the ECC800-Pro, whether the device and the ECC800-Pro are
running properly, and whether the parameter settings are consistent with
the device parameters.
Repeat
Step 4.3
and
Click Unhide All Advanced Signals, then click Power Supply Parameters.
Ensure that I power supply enable(AIDI_2/COM1/AIDI_4/COM3) and II
power supply enable(AIDI_3/COM2/AIDI_5) are Enable.
Path
Choose
Monitoring >
Cabinet > IT
Cabinet101 >
E-LOCK1a.
Choose
Monitoring >
Cabinet > IT
Cabinet101a.
Choose Monitoring > Cabinet,
and click the Controls tab.
NO TICE
Copyright © Huawei Technologies Co., Ltd.
Step 4.4
to connect other cabinet electronic clasp locks.
Click the
Running Info
tab.
Click the
Running
Parameters tab.
Click the
Controls tab.
5 Power-On Commissioning
Operation
View the running information
about cabinet electronic clasp
lock 1 on the WebUI.
Change the cabinet electronic
clasp lock name.
Select Open front door or Open
back door from the Cabinet
door control drop-down list box,
and click Submit to remotely
open the door.
Select Open front door, Open
back door, or Open all doors
from the Open the door drop-
down list box, select the setting,
and click Submit. The cabinet
electronic clasp locks unlock the
doors in batches based on the
signal value.
170
Advertisement
Table of Contents
