Table of Contents
Advertisement
FusionModule2000-S Smart Modular Data Center
User Manual
Figure 5-68 Power button on the 2288X V5 server
Figure 5-69 TaiShan 200 server power button
----End
5.3.14.5 Logging In to the PowerEcho
The PowerEcho uses the browser/server (B/S) working mode. You can manage and
maintain the NetEco system server after logging in to the PowerEcho over the
browser on a PC.
Prerequisites
●
●
●
Context
The idle timeout period of the PowerEcho system is 30 minutes by default. Set the
idle timeout period of the PowerEcho system as required. If users do not perform
any operation in the preset idle timeout period after the login, the client is
automatically logged out.
Issue 03 (2021-07-15)
The browser version is Internet Explorer 11, Firefox 38ESR, Firefox 60ESR,
Chrome 50 and Chrome 68.
NO TE
To achieve better WebUI viewing effect, you are advised to use Internet Explorer 11
and set the resolution of the PC to 1366*768 or higher.
The IP address of the NetEco server has been obtained.
The PC communicates with the NetEco server properly.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
213
Advertisement
Table of Contents
