Table of Contents
Advertisement
FusionModule2000-S Smart Modular Data Center
User Manual
(2) Configure the OMU:
1.
2.
(3) Configure the SMU:
1.
2.
3.
(4) Set other parameters based on the site requirements by referring to the
preceding steps.
Table 5-40 Parameter description
Module
Name
IMGU
Issue 03 (2021-07-15)
NO TE
If no external IP address is mapped, retain the default value of NatRtspServerPort.
Set Module Name to OMU and click Search.
Click Edit in the row where the value of Parameter Name is OMUNNatIP
and set Value to the MUNNatIP address of the MU. Click Save.
Figure 5-49 Setting the external IP address of the OMU
Set Module Name to SMU and click Search.
Click Edit in the row where the value of Parameter Name is SDKNatIP and
set Value to the NAT-mapped IP address configured on the firewall. Click
Save.
Click Edit in the row where the value of Parameter Name is SDKNatPort and
set Value to the NAT mapped port number configured on the firewall. Click
Save.
Parameter
Name
IMGUNNatIP
IMGUNNatPo
rt
Copyright © Huawei Technologies Co., Ltd.
Setting
Northbound IP address of the IVS1800, which
must be the same as the NAT-mapped IP
address configured on the firewall.
NAT port number of the IVS1800 IMGU, which
must be the same as the NAT-mapped port
number configured on the firewall.
The default port number of the IMGU before
mapping is 9554.
5 Power-On Commissioning
198
Advertisement
Table of Contents
