FusionModule2000-S Smart Modular Data Center
User Manual
2.
----End
5.3.2 Preparations and App Login
Prerequisites
App operating environment requirements:
●
●
●
●
Issue 03 (2021-07-15)
Figure 5-12 WebUI login page
On the login page, enter the preset user name admin and preset password
Changeme, set the language, and click Log In.
NO TE
– After the first login, change the password in time to ensure account security and
prevent unauthorized network attacks, such as data tampering. Huawei will not be
liable for any security issues caused by your failure to change the preset password
in time or password loss after changing.
– You are advised to change the password periodically.
– Record and keep the password properly. If you forgot the password, you will be
unable to log in to the WebUI.
– When the event notification is configured and the password retrieval mode is
configured under user management, the password can be retrieved.
– You will be logged out after being inactive for 10 minutes.
– A maximum of three users can log in to the ECC800-Pro WebUI at the same time.
The mobile device runs Android 4.0 or later and the operating system is not
rooted.
The mobile device has sufficient battery reserve.
You have obtained the IP address of the ECC800-Pro as well as the user name
and password used for WebUI login.
A PC with an IP address in the same network segment as that of the ECC800-
Pro is prepared, and the PC has connected to port WAN_1 on the ECC800-Pro.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
144