Huawei FusionModule2000-S User Manual page 109

FusionModule2000-S Smart Modular Data Center
User Manual
2.
3.
Step 2 Connect the water detection cable to the conversion cable, as shown in
3-119.
Issue 03 (2021-07-15)
Figure 3-117 Removing the cover from the water detector
Use two M3 screws to secure the bottom plate of the water detector to the
bottom of the equipment, as shown in
Figure 3-118 Installing the water detector bottom plate
Reinstall the water detector cover by referring to
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Installation
Figure 3-118.
Step 1.
Figure
100