Table of Contents
Advertisement
FusionModule2000-S Smart Modular Data Center
User Manual
●
●
●
●
●
●
●
●
●
●
Issue 03 (2021-07-15)
Do not stop using protective devices. Pay attention to the warnings, cautions,
and related precautionary measures in this document and on the equipment.
Promptly replace warning labels that have worn out.
Keep irrelevant people away from the equipment. Only operators are allowed
to access the equipment.
Use insulated tools or tools with insulated handles, as shown in the following
figure.
All cable holes should be sealed. Seal the used cable holes with firestop putty.
Seal the unused cable holes with the caps delivered with the cabinet. The
following figure shows the criteria for correct sealing with firestop putty.
Do not scrawl, damage, or block any warning label on the equipment.
When installing devices, use a torque wrench with a proper measurement
range to tighten bolts. Ensure that the wrench is not skewed and the torque
error does not exceed 10%.
Do not work with power on during installation.
Repaint any paint scratches caused during equipment transportation or
installation in a timely manner. Equipment with scratches cannot be exposed
to an outdoor environment for a long period of time.
Before operations, ensure that the equipment is firmly secured to the floor or
other solid objects, such as a wall or an installation rack.
Do not use water to clean electrical components inside or outside of a
cabinet.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Information
3
Advertisement
Table of Contents
