Table of Contents
Advertisement
FusionModule2000-S Smart Modular Data Center
User Manual
5.
6.
7.
8.
Issue 03 (2021-07-15)
Figure 5-55 Searching by IP address
NO TE
– The driver protocol of IPC6325 and C3220 cameras is HWSDK.
– The IP address segment indicates the start and end IP addresses of cameras.
You can use IP Address and Vendor to filter the required cameras in the
camera search result and select the required cameras. Alternatively, you can
directly select the required cameras in the camera list. Then verify accounts.
The default password of the HWSDK protocol is HuaWei123.
Figure 5-56 Verifying accounts
Select the cameras to be added and click Next.
Click Finish.
Preview the live video. Choose System Management > Devices > Device
Management > Micro Edge on the iClient home page. Drag an added
camera to the live video pane. If the live video can be properly played, the
camera is successfully connected.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
204
Advertisement
Table of Contents
