FusionModule2000-S Smart Modular Data Center
User Manual
Step 10 Remove the protective cover from the busbar trunking unit.
At least two protective covers are required between the power distribution units,
and between the power distribution unit and the general input unit.
Figure 3-56 Installing one power distribution unit
(1) Position for removing the protective cover
Figure 3-57 Installing two power distribution units
(1) Positions for removing the protective covers
Figure 3-58 Installing three power distribution units
(1) Positions for removing the protective covers
Figure 3-59 Removing the protective cover from the busbar trunking unit
Issue 03 (2021-07-15)
NO TICE
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Installation
64