Table of Contents
Advertisement
FusionModule2000-S Smart Modular Data Center
User Manual
----End
5.3.4 Facial Recognition
5.3.4.1 Recording Facial Data
Prerequisites
The FusionModule app has been installed on the PAD.
Procedure
1.
2.
3.
Issue 03 (2021-07-15)
b.
If the message displayed on the page is changed from "Initial startup
password authentication" to "Activated", the startup password
authentication is complete.
NO TE
– After the first login, change the password in time to ensure system access security.
– A password that has been used for a long time is more likely to be stolen or cracked.
The risk increases along with the time of use. Change the password once three months.
– It is recommended that you use different user names to log in to both the ECC800-Pro
WebUI and app at the same time. If you use the same user name to log in to the
WebUI and app at the same time, either of them will be forcibly logged out.
– The iDCService app supports only the Android system.
– The iDCService app is available only in Chinese.
Log in to the FusionModule app on the PAD as an administrator.
On the main screen of the app, tap
Face Account Management. After reading the message, tap OK.
Click Add to start recording facial data.
NO TE
The facial data is used only for configuring the facial recognition function and is not
used for other purposes. The facial data is encrypted during transmission in the
ECC800-Pro to ensure that the personal data of users is fully protected.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
. On the displayed Edit screen, select
149
Advertisement
Table of Contents
