Table of Contents
Advertisement
FusionModule2000-S Smart Modular Data Center
User Manual
1.
2.
3.
4.
5.
Step 3 On the ECC800-Pro WebUI, click Add under Video Information. In the displayed
New Video Information dialog box, enter camera and IVS1800 information.
●
●
●
●
Issue 03 (2021-07-15)
Enter https://192.168.248.10 in the address box of the browser and press
Enter to access the WebUI login page. After login, choose System Settings >
Video Management.
(Optional) Click Search.
NO TE
– The search timeout interval is 10s. If the search fails, a search failure message is
displayed.
– To avoid missing cameras, you can perform Search for multiple times.
On the found camera record, click
camera based on the external IP address allocated by the network
administrator (PC IP address and camera external IP address should be in the
same network segment).
Click the link under Link to access and log in to the camera WebUI. Enter the
preset user name admin and the preset password HuaWei123, and click Log
In.
Figure 5-37 Clicking the camera access link
Choose Settings > Network > TCP/IP, set Way to obtain IPv4 to Use the
following IP address and set an IP address to the planned IP address for the
camera. The IP address should be in the range of 192.168.248.50 to
192.168.248.199.
Name: Enter the camera and IVS1800 names (for example, Camera1).
External IP: Enter the external IP address based on the customer's plan.
Internal IP: Enter the internal IP addresses of the camera and IVS1800, for
example, 192.168.248.56.
Figure 5-38 Allocated internal IP address of the camera
Video Type: Select the video type based on the customer's device.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
and set the external IP address for the
189
Advertisement
Table of Contents
