Table of Contents
Advertisement
FusionModule2000-S Smart Modular Data Center
User Manual
Step 6 When closing the door, rotate the lock handle vertically downwards. If the door
cannot be opened or closed properly, locate the fault.
1.
2.
3.
Issue 03 (2021-07-15)
Check whether there is friction between the lock tongue and the electronic
clasp lock. If there is friction, adjust the installation position of the electronic
clasp lock.
Figure 5-23 Adjusting the installation position
Check whether there is interference between the lock tongue and the cabinet
post. If they interfere with each other, adjust the installation position of the
lock tongue.
Figure 5-24 Adjusting the installation position
Check whether there is interference between the castors and the door sill at
the bottom of the cabinet. If they interfere with each other, remove the
fastener that secures the castors.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
171
Advertisement
Table of Contents
