Table of Contents
Advertisement
FusionModule2000-S Smart Modular Data Center
User Manual
Step 2 Configure the PC IP address and the WAN1 IP address in the same network
segment.
If the WAN1 port IP address is 192.168.8.10, subnet mask is 255.255.255.0, and
default gateway is 192.168.8.1, set the PC IP address to 192.168.8.12, subnet mask
to 255.255.255.0, and default gateway to 192.168.8.1.
Step 3 Set LAN parameters.
1.
2.
3.
4.
5.
Step 4 Set Internet Explorer parameters.
1.
2.
Issue 03 (2021-07-15)
NO TE
● If the ECC800-Pro connects to a LAN and a proxy server has been selected, perform
3.3
and
Step
3.4.
● If the ECC800-Pro connects to the Internet, and the PC in a LAN accesses the Internet
over a proxy server, do not perform
access the ECC800-Pro.
Open Internet Explorer and choose Tools > Internet Options.
Click the Advanced tab and select Use TLS1.1 and Use TLS1.2.
(Optional) Click the Connections tab and select LAN settings.
(Optional) Under Proxy server, deselect Use a proxy server for your LAN.
Click OK.
Figure 5-9 Setting Internet options
When you use Internet Explorer for access, set Internet Explorer to ensure the
normal display of and operations on the WebUI. Choose Tools >
Compatibility View, and add the web access address to the compatibility
view.
Choose Tools > Internet options > Security, choose Add the ECC800-Pro IP
address to the list of trusted sites.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
Step 3.3
and
Step
3.4. Otherwise, you will fail to
Step
142
Advertisement
Table of Contents
