Huawei FusionModule2000-S User Manual page 63

FusionModule2000-S Smart Modular Data Center
User Manual
By default, clamp the clasps into the two holes in the middle. In actual conditions, you can
select holes as required.
Figure 3-39 Installing a partition plate
Step 6 Install adjacent cable troughs in the same way.
Step 7 Rotate the interconnecting lever and clamp it into the clasps until the lever is
horizontal. This operation interconnects the cable troughs.
Figure 3-40 Installing an interconnecting lever
(1) Interconnecting lever
Issue 03 (2021-07-15)
NO TE
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Installation
54