Table of Contents
Advertisement
FusionModule2000-S Smart Modular Data Center
User Manual
Procedure
Step 1 In the browser address bar, enter https://192.168.8.11:31945, and then press
Enter.
Step 2 Enter the User Name, Password on the login page and click Log In.
----End
5.3.14.6 NetEco Menu Settings
Prerequisites
You have logged in to the PowerEcho client using a browser.
Procedure
Step 1 Choose NetEco Maintenance from the main menu. Then choose NetEco Menu
Settings in the navigation tree on the left side.
Option
Setting NetEco Menu
----End
5.3.14.7 Logging In to the NetEco Client
This section describes how to log in to the NetEco client using a web browser.
Issue 03 (2021-07-15)
NO TE
192.168.8.11 is the default IP address of the NetEco.
NO TE
● The default user name for the PowerEcho is admin and the preset password is
Changeme_123. You need to change the password periodically (at an interval of 60
days) to improve system security.
● After the first login, change the password in time to ensure account security and prevent
unauthorized network attacks, such as data tampering. Huawei will not be liable for any
security issues caused by your failure to change the preset password in time or password
loss after changing.
● After you enter the incorrect password for three consecutive times, you must enter the
verification code upon the fourth login. After you enter the incorrect password for five
consecutive times, the IP address will be locked for 10 minutes.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
Description
In the NetEco Menu Settings area,
select or clear NetEco menu options,
click Confirm.
NOTE
After NetEco menu settings, refresh the
NetEco client page to check that the menu
settings take effect.
214
Advertisement
Table of Contents
