Table 5-10 Parameter Description Of History Fault Query Interface; Table 5-11 Parameter Description Of History Event Query Interface - Huawei OceanStor S5000 Series Routine Maintenance

5 Routine Maintenance Guide of the OSM
Reference Standard
User can browse history alarms in the operation interface.
Precaution
The history alarms include the history fault and the history event.
If you set two or more query parameters, only the history alarms that meet all the set conditions
are displayed.
If no condition is set, when you click Search, the system displays all history alarms.
Procedure
Step 1 Log in to the OSM.
Step 2 On the main menu, click Alarm.
Step 3 In the navigation tree, click History Fault or History Event. The Alarm Query interface or
the Query Event interface is displayed.
Step 4 Enter query conditions based on parameter description, as shown in
5-11.

Table 5-10 Parameter description of history fault query interface

Parameter
Alarm Name
Alarm Module
Severity
Recover Type
Start Time
End Time

Table 5-11 Parameter description of history event query interface

Parameter
Alarm Name
5-16
Description
This parameter indicates the alarm name that you want to query.
The parameter indicates the module that a alarm belongs to. The log module
includes Device,iSCSI Target, RAID, System, WebUI, FC, Pool,
HyperCopy, HyperImage, HyperMirror, Agent, iSCSI Initiator, EPL,
and Coffer.
This parameter indicates the alarm severity. The options are Critical,
Major, Minor, and Warning.
This parameter indicates the recover type of the alarm that you want to
query. There are two options: Manual and Auto.
This parameter indicates the start time from which you want to query alarms.
This parameter indicates the end time to which you want to query alarms.
Description
This parameter indicates the alarm name that you want to query.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor S5000 Series Storage System
Routine Maintenance
Table 5-10
Issue 01 (2010-04-20)
and Table