Configuring The N2000H V3; Configuration Overview; Default Information - Huawei N2000H V3 User Manual

N2000H V3 Appliance
User Guide
About This Chapter
This topic describes how to configure the N2000H V3 after installation.

4.1 Configuration Overview

This topic describes the default information and the initial configuration process.
4.2 Checking the N2000H V3
This topic describes how to check the N2000H V3 initial status.
4.3 Configuring RAID Properties
This topic describes how to configure RAID properties.
4.4 Configuring the BIOS
This topic describes how to configure the basic input/output system (BIOS) for the N2000H
V3.
4.5 Changing an iBMC User Password
This topic describes how to change an iBMC user password.
4.6 Installing an OS
This topic describes how to install an operating system (OS) for the N2000H V3.
4.1 Configuration Overview
This topic describes the default information and the initial configuration process.

4.1.1 Default Information

This topic describes the default information used for configuring the Appliance.
Table 4-1
Appliance.
Issue 04 (2018-11-06)
4

Configuring the N2000H V3

lists the default user name, password, and IP address used for configuring the
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Configuring the N2000H V3
66