Scenarios For Connecting The Lan Switch; Adding The Video Management System; Configuring Vcn Server Parameters - Huawei FusionModule1000A Commissioning Manual

FusionModule1000A40 Prefabricated All-in-One Data
Center
Commissioning Guide
Parameter
Step 4 Click Apply to save the settings.
----End

8.4.4 Scenarios for Connecting the LAN Switch

8.4.4.1 Adding the Video Management System

8.4.4.1.1 Configuring VCN Server Parameters

?.1.Setting Parameters on the VCN WebUI
Context
A default IP address is configured for a VCN server before delivery. Users need to modify the
IP address based on the actual network planning.
Procedure
Step 1 Modify the IP address for the VCN.
1.
2.
Issue 02 (2019-12-20)
Description
following requirements:
1. A country code must be added preceding the calling number. For example,
2. If short messages are successfully sent but the subscriber does not receive

Click Test to check the connection between the NetEco and the SMS modem.

Click Reset to reset interworking parameters of the SMS modem.

Because cameras and VCN do not support northbound and southbound isolation, the VCN service IP
address must be set to a northbound IP address.
 The camera IP address and the VCN service IP address must be in the same network segment.
 For details about northbound IP address, see section Overview of Southbound and Northbound
Network Isolation in iManager NetEco 6000 Product Documentation.
Configure the PC IP address and the VCN IP address in the same network segment.
Enter the OMU Portal address (default address: https://192.168.2.101:8443) in the
address bar of the Internet Explorer and press Enter.

You can log in to the OMU portal using only Windows Internet Explorer 8.0 or later.
 The OMU Portal version needs to be the same as the IVS version.
On the login page, enter the user name Admin and preset password Change_Me, and
click Log In to enter the OMU Portal page. A message is displayed upon the first login
Copyright © Huawei Technologies Co., Ltd.
if the subscriber is located in China, the entered calling number is in the
following format: 86 + Calling number.
the short messages, you need to remove the country code.
8 Commissioning Core Components
98