Table of Contents
Advertisement
FusionModule2000-S Smart Modular Data Center
User Manual
5.3.14.11 Creating an ECC800-Pro on the NetEco
Prerequisites
●
●
Context
For detailed operations, see
Guide of the corresponding version.
Procedure
1.
2.
3.
4.
5.
6.
Issue 03 (2021-07-15)
You have logged in to the NetEco client using a web browser.
You have created modules in Data Center Planning.
Log in to the NetEco client.
On the main menu, choose Device Management > Configuration >
Planning Configuration.
Choose the smart module where you want to create a device from the
navigation tree on the left.
Click
in the upper-left corner of the toolbar.
Click Access in the Operation column. The Device Integration dialog box is
displayed.
In the Device Integration dialog box, add the ECC800 to the specified smart
module.
Figure 5-72 Adding an ECC800-Pro device to the smart module
Copyright © Huawei Technologies Co., Ltd.
iMaster NetEco Device Installation and Commissioning
5 Power-On Commissioning
220
Advertisement
Table of Contents
