Huawei FusionModule2000-S User Manual page 77

FusionModule2000-S Smart Modular Data Center
User Manual
Procedure
Step 1 Install the round lock tongue of the electronic clasp lock.
The electronic clasp lock closes the door by using the cam to trigger the
connecting rod. The cabinet door must be open before the round lock tongue is
installed. Otherwise, the door cannot be opened.
Figure 3-65 Installing a round lock tongue
(1) Round lock tongue
Step 2 Remove the intelligent lock positioning plate from the cabinet post.
Figure 3-66 Removing the intelligent lock positioning plate
(1) Intelligent lock positioning plate
Step 3 Install the electronic clasp lock above the mounting plate on the door frame post.
Issue 03 (2021-07-15)
NO TICE
NO TE
● To replace an electronic lock, remove the lock tongue on the door and the lock latch on
the door frame post, and then replace the round lock tongue.
● Ensure that the notch on the round lock tongue faces upwards.
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Installation
(2) Intelligent lock mounting plate
68