KYOWA WGA-910A Series Instruction Manual page 90

6-5-2. System
(1) Key Lock
Select lock (inhabit changing) or release.
The key is invalid and displayed in gray in locked state.
The key changes to the
Press the
locked state.
<Setting Range>
Lock or Release
<Operations for key lock>
1) Press the
2) Press the
3) Press the
In addition, the
4) Press the
The key changes to the
In addition, other keys are invalid and displayed in gray.
NOTE
It is not possible to shift to other "setting window" while locking
the key operation.
<How to release the lock>
1) Press the
2) Press the
key after the window gets back to the "Measuring" window.
key with the locked state. The window changes to the "Key Lock" window to release the
key on the "Initial Setting" window.
key on the "System (1/2)" window.
key and then
key is invalid and displayed in gray.
key to get back to the "Measuring" window.
key on the "Measuring" window.
key and then
key to be locked.
key.
key for releasing.
86
Initial Setting
Return
The signal to select the num-
Meas.Select Signal
ber of measurement condition
is set.
Key Operation
The initial sets on system are
System
set.
Self-check of WGA-910A is con-
Self-Check
ducted.The program version and
serial No.are displayed.
The operations of WGA-910A and
Operation Check
external device are checked.
Next
System
Return
The 'Lock'or 'Release'to
Key Lock
change the sets by key is se-
lected.
Release
Each of the set values is re-
Set Initialize
turned to reset to the de-
fault.
Input Set
The time of turning on the
Backlight Time
backlight is set.
0 min
The indicated language is set.
Language
English
Next
Measure
1 / 2
Measure
1 / 2