KYOWA WGA-910A Series Instruction Manual page 109

(4) Format
Erases (quick format) the all data saved in the SD card.
<How to operate>
1) Press the
window.
2) Press the
to format the SD card.
Press the
formatting.
3) Format starts and the "Formatting" window appears.
The red flame blinks and the progress condition is displayed on the
progress bar during formatting.
After completing the formatting, the "SD Card Set (1/2)" window
appears again.
NOTE
The "Format Error" window appears if the
pressed with no SD card inserted or with write-protected mode.
Press the
Format" window.
key on the "SD Card Setting (1/2)"
key on the "Confirmation of Format" window
key to get back to the previous window without
key to get back to the "Confirmation of
Blinks
key is
105
SD Card Setting
Return
The all set values excluding
Set Value Save
the calibration value are
saved to SD card.
The all set values excluding
Set Value Read
the calibration value are
read from SD card.
The wave file name saved in
View Wave File Name
SD card
is checked or deleted.
The all datas saved in SD card
Format
are deleted.(Quick format)
Next
Measure
1 / 2