KYOWA WGA-910A Series Instruction Manual page 91

(2) Set Initialize
Initializes the saved setting value to the default value.
However, the calibration value is not initialized.
<Setting Range>
Input Set:
Meas. Cond. Set: Initializes setting values of the measuring condition setting.
Wave Disp. Set:
Initial Set:
Option Set:
All Set:
<How to operate>
1) Press the
2) Press the
Select and press the target key and
3) The "Confirmation of Set Initialize" window appears.
Press the
Press the
initialization.
The and
Initializes setting values of the input setting.
Initializes setting values of the waveform display setting.
Initializes setting values of the initial setting.
Initializes setting values of the optional setting.
Initializes all setting values excluding the calibration value.
key on the "System (1/2)" window.
key to display the target setting key.
key for initializing.
key to get back to the previous window without
keys are invalid and displayed in gray.
key.
87
System
Return
The 'Lock'or 'Release'to
Key Lock
change the sets by key is se-
lected.
Release
Each of the set values is re-
Set Initialize
turned to reset to the de-
fault.
Input Set
The time of turning on the
Backlight Time
backlight is set.
0 min
The indicated language is set.
Language
English
Next
Measure
1 / 2