Download Print this page

KYOWA WGA-910A Series Instruction Manual page 143

Hide thumbs Also See for WGA-910A Series:

Advertisement

Comparator setting
Measurement mode setting
Wave form display
System
Self-check
Operation check
Control input
Control output
Communication
condition file can be saved.
Capable of switching by the key operation, control input,
communication command.
The number of points : 5
Type : extra high (HH), high (HI), OK,
low (LO), extra low (LL).
For [Interval peak/bottom] [Time peak/bottom] only,
Peak value: max. 1 (HI), min. 1 (LO),
Bottom value: max. 2 (HI), min. 2 (LO).
Setting range : -9999 to +9999 count
Hysteresis width : 0 to 9999 count
Setting : Using comparator can be set
Comparison speed : 4000 times/sec.(Normal comp. mode)
Operation mode :
Normal, peak hold, block-specified peak hold,
time-specified peak hold, bottom hold, block-specified
bottom hold, time-specified bottom hold,
arbitrary point hold, block peak-bottom, time peak-bottom,
block average, time average
Detect times, delay time, comparison mode and display mode
can be set.
X-axis setting :
End point : 0.5, 1.0, 2.0, 5.0, 10.0, 20.0
Y-axis setting : Start point : -99999 to 99999
End point : 250, 500, 1000, 2000, 5000, 10000,
Start mode of waveform, passed level, passed level way,
holding time of waveform.
WGA displays the waveform of the input variation regardless
to the "Measure Mode Set" setting.
Key lock, setting value initialize, backlight illumination time,
language, clock
Memory, channel
Display, touch panel, control input/output,
communication, BCD output, D/A output, SD card
The number of points : 9
Type : Zero command, hold command, reset command,
waveform command, TEDS command,
measurement condition select 0 to 3
Signal format: Non-voltage contact signal, or Open collector
The number of points : 9
Type : HH, HI, OK, LO, LL,
healthy, abnormal channel, abnormal memory, SD
communication error
Output format : Open collector
Load capacity : 30 VDC, 20 mA (resistance load)
Signal system : RS-232C Full duplex system
Transmission mode : Asynchronous
Bit configuration : Data bit : 7
139
50.0, 100.0 sec.
20000, 50000, 100000, 200000
(Capacity: 12 VDC, 5 mA or more)

Advertisement

loading

This manual is also suitable for:

Wga-910a-0Wga-910a-1Wga-910a-2Wga-910a-3Wga-910a-4Wga-910a-12 ... Show all