KYOWA WGA-910A Series Instruction Manual page 83

6-4. WAVE DISPLAY SETTING (SETTING WAVEFORM DISPLAY)
6-4-1. Setting X-axis
Sets the end point of the time axis (= X-axis of the waveform).
Displays the waveform from the start (press the
X-axis end point as one window.
Press the key on the "Waveform" window. The "X-axis Setting" window appears directly.
<Setting Range>
End point: 0.5, 1.0, 2.0, 5.0, 10.0, 20.0, 50.0, 100.0 (sec)
<How to operate>
1) Press the
2) Press the
3) Press the
X-axis Setting
window.
4) Press the
Press the target key and
<How to operate the X-axis directly from the "Measuring" window>
1) Press the
2) The "X-axis Setting" window appears.
Conduct setting as the above.
NOTE
The key is displayed in gray and the X-axis setting cannot be changed when displaying the waveform.
For changing the X-axis setting, press the
window.
key on the "Measuring" window.
key on the "Setting (1/2)" window.
key on the "Wave Display Setting (1/2)"
key to display the target value.
key for registering.
key on the "Waveform" window.
key on the "Waveform" window) to the preset time of the
key and clear the waveform on the "Waveform"
79
Wave Display Setting
Return
The end point of X-axis(time)
X-axis Setting
is set.
10.0sec
The start and end point of Y-
Y-axis Setting
axis are set.
1000.00kN
The mode to start the wave
Start Mode of Wave
display is set.
Auto Mode
The level that measured value
Passed Level
passes for satisfying trigger
condition is set.
0.00kN
Next
Switch Cursor ON Wave Clear
kN
300.00
kN
Y-axis
-200.00
0.0
RECORD X-axis Start
X-axis Setting
Return
Now
End P.
10.0
New
10.0sec 20.0sec
50.0sec 100.0sec
Push the target key and 'Register'key.
Measure
1 / 2
Set
10.0
S
Measure
sec
sec
2 / 2
Register