KYOWA WGA-910A Series Instruction Manual page 37

4-4. HOW TO OPERATE WAVEFORM AND CURSOR WINDOWS
"Waveform" window
Press the key. Displaying waveform starts when conditions which were set in the "Waveform" window are
satisfied.
After pressing the
waveform data.
While loading the waveform, no key operation other than the
key are displayed in gray.
After loading the waveform for one window, the detecting point is displayed with a red point when detecting the point
such as peak value with the operation mode other than the "Normal."
Key
The "Cursor" window appears.
Detecting value such as the
current measured value, peak
Key
The "Y-axis Setting" window
appears.
The key is displayed in
gray and key operation is invalid
during displaying the waveform.
NOTE
Displays a waveform that describes an input variation regardless of setting of the "Operation Mode" in the
"Measure Mode Setting" window.
However, the measured value on the upper left is the value related to the preset "Operation Mode" (such as peak
value).
Therefore, a value of the Y-axis on the waveform is different from the upper left value.
Suppose the "Peak Hold" is selected.
Though the upper left value displays the updating peak value, a waveform shows the input variation as-is.
Therefore, the Y-axis value on the waveform does not coincide with the upper left value (peak value).
How to record the waveform data.
To start recording the waveform data, press the
data for 1 window, the WGA-910A saves the data in the SD card.
To stop recording the waveform data, press the
key, the key changes to the
Switch Cursor ON
300.00
kN
Y-axis
-200.00
0.0
RECORD
Key
RECORD
Starts recording data and saves them
in the SD card.
RECORD
key. Press the
key can be performed and all keys other than the
Wave Clear Set
kN
10.0
S
X-axis Start
key. Every time the WGA-910A records the waveform
key.
33
key to stop loading the
Key
Clears the current displaying
Key
The "X-axis Setting" window
appears.
The key is displayed in gray
and key operation is invalid during
/ Key
Starts displaying the waveform/
stops loading the waveform.