KYOWA WGA-910A Series Instruction Manual page 130

(28) [SMF]
Content:
Format:
Parameter:
Return value format:
Description and others
Reading command
Return value
(29) [SG1]
Content:
Format:
Parameter:
Return value format:
Description and others
Reading command
Return value
Set the measuring mode setting.
SMFaa, b, c, x. xx, y. yy<CR>
aa, b, c, x. xx, y. yy
ok<CR><LF>
Corresponding to the [/M] command.
PRR070
aa, b, c, x.xx, y.yy<CR><LF>
Set the waveform display setting 1 (X-axis and Y-axis settings)
SG1a, b, ±xxxxxx<CR><LF>
a, b, ±xxxxxx
Start point of Y-axis: -99999 to 99999 (count)
Indicated value with a decimal point. If the indicated value has no
decimal point, it is filled with '0s' from the head.
End point of X- axis
0: 0.5 sec.
4: 10.0 sec.
End point of Y-axis
0: 250
5: 10000
ok<CR><LF>
Corresponding to the [/M] command.
PRR130
a, b, ±xxxxxx<CR><LF>
Detect time: 0.00 to 9.99 (sec.)
Delay time: 0.00 to 9.99 (sec)
Comparison mode
0: Normal Comp.
Display mode
0: Normal Disp.
Operation mode
00: Normal
02: Block-specified peak
04: Bottom hold
06: Time-specified bottom
08: Block Peak-Bottom
10: Block average
Detect time
Delay time
Comparison mode
Display mode
Operation mode
1: 1.0 sec
5: 20.0 sec.
1: 500 2: 1000
6: 20000 7: 50000
Start point of the Y-axis: -99999 to 99999 (count)
End point of the X-axis
End point of the Y-axis
126
1: Hold Comp.
1: Hold Disp.
01: Peak hold
03: Time-specified peak
05: Block-specified bottom
07: Arbitrary point hold
09: Time Peak-Bottom
11: Time average
2: 2.0 sec 3: 5.0 sec
6: 50.0 sec. 7: 100.0 sec.
3: 2000 4: 5000
8: 100000 9: 200000