KYOWA WGA-910A Series Instruction Manual page 104

About writing/reading the setting value to the SD card and reading the waveform data
Capable of writing the setting value to the SD card and capable of reading the setting value and waveform data
from the SD card with the PC software for the SD card.
Capable of converting the waveform data to the CSV file and displaying the waveform.
The PC software for the SD card Instruction Manual are included in the accessory CD-R.
NOTE
After selecting the
To close the error windows, operate as follows.
1) The SD card is nor inserted to the slot or the SD card is still write-
protected even if the
window.
To close the error window, press the
"Waveform" window.
Insert the SD card or release the write-protected mode.
2) After pressing the
while saving the waveform data after starting the waveform display,
the waveform files from No. 00001 to No. 21844 are all filled with
data.
To close the error window, press the
the window or remove the SD card from the slot.
3) The SD card is removed from the slot after starting the waveform
display.
To close the error window, press the
updating of the waveform display.
Then press the
Insert the SD card to the slot again.
4) The free capacity of the SD card is not enough after pressing
the key on the waveform display window.
RECORD
To close the error window, press the
waveform display window.
Then remove the SD card from the slot and increase the free capacity
by erasing the extra file, etc.
5) The free capacity of the SD card is not enough while saving the
waveform data.
Press the key and stop updating the waveform display
to close the error window.
To close the error window, press the
change the window or remove the SD card from the slot.
Then remove the SD card from the slot and increase the free
capacity by erasing the extra file, etc.
key and if the following conditions happen, an error window appears.
RECORD
key is pressed on the "Waveform"
RECORD
key on the "Waveform" window or
RECORD
key to change the window.
key to get back to the
key to change
key and stop the
key to get back to the
key to
100
Switch Cursor ON Wave Clear
kN
300.00
kN
SD Card Error
SD card is full of
wave files.
Y-axis
-200.00
0.0
RECORD X-axis Stop
Switch Cursor ON Wave Clear
kN
300.00
kN
SD Card Error
The writing cannot
be confirmed.
Y-axis
-200.00
0.0
RECORD X-axis Stop
Switch Cursor ON Wave Clear
kN
300.00
kN
SD Card Error
SD card does not
have empty capacity
Y-axis
-200.00
0.0
RECORD X-axis Stop
Set
10.0
S
Set
10.0
S
Set
10.0
S