KYOWA WGA-910A Series Instruction Manual page 16

2-1-4. Measuring Window (Cursor)
1)
2)
3)
4)
5)
6)
7)
1) Cursor OFF key
2) Switch key
3) Measured value
4) Y axis end point
5) Y axis start point
6) / keys
7) Cursor position time
8) Detect Move key
9) Set key
10) Detecting point
11) Measuring waveform
12) X axis end point
13) / keys
Switch Cursor OFF
300.00
kN
-200.00
Cursor
3.
key
The cursor disappears and gets back to the "Waveform display" window.
The Switch key is displayed in gray and no key operation can be performed.
Displaying a measurement waveform data (value of the Y-axis) at the yellow
point on the cursor.
Displays the end point of the Y-axis that is set in the "Y-axis setting" of the
"Waveform display setting."
Displays the start point of the Y-axis that is set in the "Y-axis setting" of the
"Waveform display setting."
Moves the target digit (highlight) of the cursor position time.
Displays time (X-axis) of the cursor position.
Immediately moves the cursor to the Detecting point of the item 10).
The Set key is displayed in gray and no key operation can be performed.
Displays a detecting point (peak point) with a red point when conducting a
measurement other than normal.
Displays a measuring waveform when the Cursor OFF key is pressed.
Displays the end point of the X-axis that is set in the "X-axis setting" of the
"Waveform display setting."
Increases or decreases the number of the time setting digit for moving the
cursor to right or left.
Detect Move Set
kN
10.0
01 5
S
12
8)
9)
10)
11)
12)
S
13)