KYOWA WGA-910A Series Instruction Manual page 134

(37) [OP3]
Content:
Format:
Parameter:
Return value format:
Description and others
Reading command
Parameter:
*2 For the [Block Peak-Bottom] and [Time Peak-Bottom] only. Or, you will not get the BCD or D/A classification
value.
(38) [OP2, OP3]
Content
Format
Parameter
Return value format
Description and others Corresponding to the [/M] command.
Reading command
Parameter
8-3-5. Other
(39) [Undefined command response]
Content:
Format:
Set the D/A output.
OP3, ±xxxxxx, ±yyyyyy, a<CR>
OP3, ±xxxxxx, ±yyyyyy, a
ok<CR><LF>
Corresponding to the [/M] command.
PRR100
±xxxxxx, ±yyyyyy, a
Set the BCD output and D/A output.
BCD output The same as the [OP2].
D/A output The same as the [OP3].
BCD output The same as the [OP2].
D/A output The same as the [OP3].
ok<CR><LF>
PRR100
120, a, b, c, d, e, f, ±xxxxxx, ±yyyyyy, a
Response responses to undefined command.
W□□□□□□?<CR><LF>
D/A classification (*2)
0: Peak value
Full display: -99999 to 99999 (count)
ZERO display: -99999 to 99999 (count)
Both values include a decimal point. If the indicated value
has no decimal point, it is filled with '0s' from the head.
D/A classification (*2)
Full display: -99999 to 99999 (count)
ZERO display: -99999 to 99999 (count)
Output format
Transmission speed
EOC logic
Polarity logic
Data logic
130
1: Bottom value
D/A classification
Full display: -99999～99999
(count)
ZERO display: -99999～99999
(count)
BCD classification