KYOWA WGA-910A Series Instruction Manual page 131

(30) [SG2]
Content:
Format:
Parameter:
Return value format:
Description and others
Reading command
Return value
(31) [SPN]
Content:
Format:
Parameter:
Return value format:
Description and others
Reading command
Return value
(32) [SBC]
Content:
Format:
Parameter:
Return value format:
Description and others
Reading command
Return value
Set the waveform display setting 1 (start mode of wave, passed level, level passing way,
hold time of wave)
SG2a, b, ±xxxxxx, yy. y <CR><LF>
a, b, ±xxxxxx, yy. y
ok<CR><LF>
Corresponding to the [/M] command.
PRR131
a, b, ±xxxxxx, yy.y<CR><LF>
Set the measuring condition selecting signal.
SPNa<CR>
a
0: key operation
ok<CR><LF>
Corresponding to the [/M] command.
PRR150
a<CR><LF>
measuring condition selecting signal
Set the backlight time
SBC, xx <CR>
xx
Backlight time: 0 to 99 (min.)
ok<CR><LF>
Corresponding to the [/M] command.
PRR151
xx
Backlight time
Hold time of wave: 0.0 to 99.9 (sec)
Indicated value with a decimal point. If the indicated value
has no decimal point, it is filled with '0s' from the head.
Passed level: -99999 to 99999 (count)
Indicated value with a decimal point. If the indicated value
has no decimal point, it is filled with '0s' from the head.
Level passing way
0: Rising 1: Falling
Start mode of wave
0: Auto Mode 1: Normal Mode
Hold time of wave
Passed level
Level passing way
Start mode of wave
1: Control input
127
2: Both
2: Single Mode
2: Command