KYOWA WGA-910A Series Instruction Manual page 18

2-1-6.MeasuringWindow(ZoomInNumberViewDualDisplayfor[BlockPeak-Bottom]and[TimePeak-Bottom])
1)
2)
3)
4)
5)
1) Switch key
2) Comparator status lamp for
peak value
3) Peak value
4) Comparator status lamp for
bottom value
5) Bottom Value
6) ZERO key
7) Set key
Switch
Peak
LO OK
Bottom
LO OK
Display changes in order from "Number View Dual Display" - "Zoom In
Number View Dual Display" - "Waveform View Dual Display" by pressing the
Switch key.
Based on the detecting peak value, when turning ON the comparator outputs,
the [HI-1] light up in red, [OK] lights up in white, and [LO-1] lights up in
yellow.
Displays a peak value with the unit.
Based on the detecting bottom value, when turning ON the comparator outputs,
the [HI-2] light up in red, [OK] lights up in white, and [LO-2] lights up in
yellow.
Displays the bottom value with the unit.
Conducts digital zero to set the display of the measured value to 0 (or additional
value).
Displays the setting window.
Zero Set
HI
kN
HI
kN
14
6)
7)