KYOWA WGA-910A Series Instruction Manual page 89

6-5. INITIAL SETTING
6-5-1. Meas. Select Signal (Measuring Condition Selecting Signal)
Sets a signal for selecting a measuring condition number.
・For key operation:
・For control input:
・For communication: Sets the measuring condition No. with the RS command.
<Setting Range>
Key operation, Control input, Command
<How to operate>
1) Press the
2) Press the
3) Press the
4) Press the
5) Press the target key and
NOTE
The measuring condition No. cannot be changed when other than selected signals are input.
Sets the measuring condition No. by pressing
window.
Sets the measuring condition No. with the combination of ON/OFF setting from the
"Measuring condition select 0" to "Measuring condition select 3."
key on the "Measuring" window.
key on the "Setting (1/2)" window.
key on the "Setting (2/2)" window.
key on the "Initial Setting" window.
key for the registration.
85
key on the "Meas. Cond. Setting"
Setting
'Meas.Select Signal'
Initial Setting
'System', 'Self/Operation
Check'and 'SD Card'
'Communication', 'BCD Output',
Option Setting
'DA Output'and 'CC-Link'
are set.
Previous
Initial Setting
Return
The signal to select the num-
Meas.Select Signal
ber of measurement condition
is set.
Key Operation
The initial sets on system are
System
set.
Self-check of WGA-910A is con-
Self-Check
ducted.The program version and
serial No.are displayed.
The operations of WGA-910A and
Operation Check
external device are checked.
Measure
2 / 2
Measure
Next 1 / 2