KYOWA WGA-910A Series Instruction Manual page 63

6-2-4. Sensor Output Value (Original Value)
Displays the current output value of the sensor on the monitor.
After pressing the
"mV/V" and "με."
<Setting Range>
-3.2000 to 3.2000 (mV/V)
<How to operate>
1) Press the
2) Press the
3) Press the
Original Value
4) After pressing the
continuously measured and displayed for every 0.5 second.
MEMO
The sensor output value is displayed in "--.---- mV/V" and "--.----
με" before starting the measurement.
5) Press the
value.
key, the output value is measured for every 0.5 second and displayed in both units
(-6400.0 to 6400.0 με)
key on the "Measuring" window.
key on the "Setting" key.
key on the "Input Setting" key.
key, the output value of the sensor is
key to stop the measurement of the sensor output
59
Input Setting
Return
A function that stables the
Smoothing
indicated value by reducing
unnecessary noise.
A function that automatically
Zero Compensation
compensates the fine zero-
shift.
The measured value is display-
Additional Value
ed with adding the 'Additional
Value'.
The original value of sensor
Original Value
is monitored.
Measure