KYOWA WGA-910A Series Instruction Manual page 96

6-5-4. Operation Check
(1) Display Check
Checks the display operation. Check items are moved as follows.
<Setting Range>
Color: Window color automatically changes from Red - Green - Blue - Yellow - Red by pressing the
key.
Backlight: Press the
<How to operate>
1) Press the
2) Press the
window.
3) Window color automatically changes from Red - Green - Blue -
Yellow - Red by pressing the
At this time, other than
displayed in gray.
Press the
window (background color is black).
4) Press the
After that, touch the window to light up.
key to go off the backlight. Touch the window to light up the backlight.
key on the "Initial Setting" window.
key on the "Operation Check (1/2)"
key.
keys are invalid and
key again to get back to the standard
key to go off the backlight.
Window color
changes in order.
Touch the window
again to light up.
92
Initial Setting
Return
The signal to select the num-
Meas.Select Signal
ber of measurement condition
is set.
Key Operation
The initial sets on system are
System
set.
Self-check of WGA-910A is con-
Self-Check
ducted.The program version and
serial No.are displayed.
The operations of WGA-910A and
Operation Check
external device are checked.
Next
Display Check
Return
Push the key,the color is
Color
changed in order of red,green,
blue,yellow and red.
Push the key for turning OFF.
Backlight
Push the panel for turning ON.
Display Check
Return
Push the key,the color is
Color
changed in order of red,green,
blue,yellow and red.
Push the key for turning OFF.
Push the panel for turning ON.
Display Check
Return
Push the key,the color is
Color
changed in order of red,green,
blue,yellow and red.
Push the key for turning OFF.
Backlight
Push the panel for turning ON.
Measure
1 / 2
Measure
Measure
Measure