KYOWA WGA-910A Series Instruction Manual page 46

(4) Unit
Set the target unit.
Refer to "11-2 UNIT LIST" for available unit.
In order to display "kgf," do as follows.
<Setting range>
Refer to "11-2 UNIT LIST."
<How to operate>
1) Select the type of the unit first and press the target key.
Press the
2) Units of the selected type appear below. Press the target key.
Press
window.
Press the
as an example.
3) Press the
4) Calibration finishes.
Press the
key as an example.
key when the target unit is not displaying on the
key to display the [kgf] on the "New" column
key to register the setting value.
key at last to move to the "Measuring" window.
42