KYOWA WGA-910A Series Instruction Manual page 70

Block (-specified)
average
(measurement)
Time(-specified)
average
(measurement)
<How to operate>
1) Press the
2) Press the
3) Press the
window.
4) Press the
window.
5) Press the
Press the target key and
6) If the key is pressed on the above "Operation Mode"
window and gets back to the "Measure Mode Setting" window,
some non-target functions are displayed in gray according to the
selected mode.
Suppose the "Arbitrary Hold" is selected in the right figure.
The
current setting value, and the descriptions are displayed in gray.
NOTE
Some keys become invalid and the setting values and descriptions
are displayed in gray according to the type of the "Operation
Mode".
Indicates the average value of measured values by the block-specified operation. When
the HOLD command is turned OFF, the indicated average value is kept hold. When the
RESET command is turned ON, the indicated average value is canceled.
Indicates the average value of measured values by the time-specified operation. When
the HOLD command is turned OFF, the indicated average value is kept hold. When the
RESET command is turned ON, the indicated average value is canceled.
key on the "Measuring" window.
key on the "Setting" window.
key on the "Meas. Cond. Setting"
key on the "Measure Mode Setting (1/2)"
key to display the target mode.
key for registering.
Displayed in
keys, the
66