KYOWA WGA-910A Series Instruction Manual page 97

(2) Touch Panel Check
For checking the touch panel operation.
<How to operate>
1) Press the
window.
2) Press a white key on the window to change in yellow.
Press the yellow key again to get back to white.
Press the
window.
(3) Control I/O Check
Checks operations of the control input/output signals.
White square of the target pin No. lights up in blue while the control input signal is turned ON.
Press the key of the target pin No. The display color becomes yellow and the control output signal is turned ON.
Press the same pin No. again to get back to the standard color and the control output signal is turned OFF.
<Setting Range>
Input: 19 to 27 (Pin No. 19 to 27)
Output: 1 to 10 (Pin No. 1 to 10)
<How to operate>
1) Press the
window.
2) White square of the target pin No. lights up in blue while the control
input signal is turned ON.
3) Press the target output signal key of the pin No. The display color
becomes yellow and the open collector output signal is turned ON.
key on the "Operation Check (1/2)"
key to get back to the "Operation Check"
key on the "Operation Check (1/2)"
93