KYOWA WGA-910A Series Instruction Manual page 100

(7) SD Card Check
Checks the SD card operation and displays it if any error is detected.
MEMO
The control output [SD] is turned ON while accessing to the SD
card.
<How to operate>
1) Press the
window.
2) Press the
"Checking SD card" window blinks.
The
The result is displayed in a short moment.
3) "OK" is displayed in the "Rst." column when the operations of
the SD card are correct.
4) "Error" is displayed in the "Rst." column when any error is
detected and the following error is displayed in the Error
Dialog window.
<Error of the SD card check>
1 SD card is not set in WGA-910A.
Confirm that SD card is correctly inserted in slot.
2 SD card has no enough the empty capacity. The data cannot be saved no more.
3 SD card is state of write protect.
4 The set value file is not existed in SD card.
key on the "Operation Check (1/2)"
key to start the SD card operation and the
keys are displayed in gray.
Blinks
Error Dialog
Display
96
SD Card Check
Return
Rst. Error
Error Dialog
SD card is not set in WGA-910A.Check that SD card
is correctly inserted in slot.
Push 'Execute'key for checking the SD
card operation.When detecting error,er-
ror dialog appears.
Measure
Execute