KYOWA WGA-910A Series Instruction Manual page 144

SD card
Power supply
Dimensions
Weight
Operating temperature Humidity
Applicable standard
Stop bit : 1
Parity bit Odd number
Flow control : Not compatible
Setting contents :
Communication speed : 2400, 4800, 9600 ,19200 bps
Transmission mode : Repeat Output, Output at hold, Tx and Rx
Saving setting value : Saves the all setting value (excluding the
Reading setting value : Reads the all setting value (excluding the
Recording measuring value : Pushing recording key, WGA records
View wave file name : Browsing the waveform data, deleting
Format : Erase all data that are saved in the SD card is available
(Quick format is available)
Update : Capable of updating the program version that is saved in
the SD card
SD card type : SD, SDHC (up to 32 GB)
100 to 240 V 50/60 Hz, Power consumption: 20 VA or less
100 mm (W) ×96 mm (H) ×135 mm (D)
Approx. 1.0 kg
-10 to 40 °C, down to 80 %RH (Noncondensing)
EMC directive
Low voltage directive
RoHS Directive EN50581
140
calibration value) to the SD card
calibration value) from the SD card and rewrite
those of the WGA to the read one
the wave data to the SD card
the wave data, and deleting the directory
are available
EN61326-1 (Class A)
EN61010-1, EN61010-2-030
(Installation category
measurement category O)
, pollution degree 2,
II