KYOWA WGA-910A Series Instruction Manual page 102

6-5-5. SD CARD SETTING
(1) Set Value Save (Saving Setting Value)
Capable of saving the all setting values of the WGA-910A to the SD card and capable of checking them with the PC
software for the SD card.
The control output [SD] is turned ON while saving the setting values.
<How to operate>
1) Press the
2) Press the
3) Press the
window.
4) Press the
values" window to start saving the setting values to the SD card.
Press the
saving.
5) After starting the saving of the setting values, the "Saving the set
values" window appears.
The red flame blinks and the progress condition is displayed on the
progress bar while saving the setting value.
After the saving, the "SD Card Set" window appears again.
NOTE 1
Do not remove the SD card or do not turn OFF the WGA-910A.
Or, it may cause trouble.
In addition, the measurement cannot be conducted during saving.
NOTE 2
The "Error of saving the set values" window appears when no SD card is inserted or the SD card does not
have enough free space.
Press the
key on the "Initial Setting (1/2)" window.
key on the "Initial Setting (2/2)" window.
key on the "SD Card Setting (1/2)"
key on the "Confirmation of saving the set
key to get back to the previous window without
key to get back to the "Confirmation of saving the set values" window.
Blinks
98
Initial Setting
Return
The signal to select the num-
Meas.Select Signal
ber of measurement condition
is set.
Key Operation
The initial sets on system are
System
set.
Self-check of WGA-910A is con-
Self-Check
ducted.The program version and
serial No.are displayed.
The operations of WGA-910A and
Operation Check
external device are checked.
Next
Initial Setting
Return
The set value is read and
SD Card Setting
saved. The wave file is
viewed.
Previous
SD Card Setting
Return
The all set values excluding
Set Value Save
the calibration value are
saved to SD card.
The all set values excluding
Set Value Read
the calibration value are
read from SD card.
The wave file name saved in
View Wave File Name
SD card
is checked or deleted.
The all datas saved in SD card
Format
are deleted.(Quick format)
Next
Measure
1 / 2
Measure
2 / 2
Measure
1 / 2