KYOWA WGA-910A Series Instruction Manual page 110

(5) Update
Capable of updating the program version of the WGA-910A to the target version in the SD card.
<How to operate>
1) Press the
window.
2) Check the program version of the WGA-910A and that of in the SD
card on the "Confirmation of update" window.
Press the
WGA-910A to that in the SD card.
Press the
updating.
3) After starting the updating, the progress condition is displayed with
the progress bar.
The "POWER" LED lights up in orange during updating.
After finishing the updating, the "POWER" LED lights up in green.
NOTE 1
Do not remove the SD card or turn OFF the WGA-910A during
updating.
Or, it may cause trouble such as a window does not start again.
MEMO
The version of the SD card is displayed as "-" with no SD card
inserted or no updating program written in the SD card.
NOTE 2
The "Update Error" window appears if the
pressed with no SD card inserted or with no updating program
written in the SD card.
Press the
update" window.
4) Turn OFF the WGA-910A and turn ON it again.
The new version is displayed on the right side of the opening
window.
Check that the version is changed to the new one.
In addition, check that the version of the WGA-910A is updated on
the "Self-check" window.
key on the "SD Card Setting (2/2)"
key to rewrite the program version of the
key to get back to the previous window without
key to get back to the "Confirmation of
key is
106
SD Card Setting
Return
The program version of WGA-
Update
910A is updated to the same
version in the SD card.
Previous
Update
Return
Confirmation of updating
Push 'Execute'key to be updated to the same ver-
sion in the SD card.
Push 'Cancel'key to get back to the previous win-
dow.
1.00
Version of WGA-910A
1.03
Version of SD card
Cancel Execute
Update
Return
Confirmation of updating
Push 'Execute'key to be updated to the same ver-
sion in the SD card.
Push 'Cancel'key to get back to the previous win-
dow.
1.00
Version of WGA-910A
----
Version of SD card
Cancel Execute
Measure
2 / 2
Measure
Measure