KYOWA WGA-910A Series Instruction Manual page 126

8-3-4. Setting
(17) [SBV]
Content:
Format:
Parameter:
Return value format:
Description and others
Reading command
Return value
(18) [ZAD]
Content:
Format:
Parameter:
Return value format:
Description and others
(19) [VCL]
Content:
Format:
Parameter:
Return value format:
Description and others
Reading command
Return value
(20) [EIC]
Content:
Format:
Parameter:
Return value format:
Description and others
Reading command
Return value
Set the excitation voltage.
SBVa<CR>
a
0: 2V 1: 10V
ok<CR><LF>
Corresponding to the [/M] command.
PRR012
a<CR><LF>
0: 2V 1: 10V
Conduct no-load zero.
ZAD<CR>
None
ok<CR><LF>
Corresponding to the [/M] command.
Conduct actual load calibration.
VCL ± yyyyyy, zz<CR>
±yyyyyy, zz
Unit: 01 to 79
Rated display value: -99999 to 99999 (count)
Indicated value with a decimal point. If the indicated value has no
decimal point, it is filled with '0s' from the head.
ok<CR><LF>
E-12<CR><LF> (When an error occurs)
The results of the command will be saved.
PRR010
For details, see the [EIC].
Conduct sensitivity registering calibration.
EIC ±x.xxxx, ±yyyyy, zz<CR>
±x.xxxx, ±yyyyy, zz
ok<CR><LF>
E-12<CR><LF> (When an error occurs)
The results of the command will be saved.
PRR010
±x.xxxx, ±yyyyy, zz
79 types Refer to "12-2 UNIT LIST."
Unit: 01 to 79 79 types
LIST."
Rated display value: -99999 to 99999 (count)
Indicated value with a decimal point. If the indicated
value has no decimal point, it is filled with '0s' from the
head.
Rated output value: -3.2000 to 3.2000 (mV/V)
Unit:
Rated display value
Rated output value
122
Refer to "11-2 UNIT