KYOWA WGA-910A Series Instruction Manual page 99

(6) D/A Output Check
Valid for equipping the optional D/A output (WGA-910A-2) or BCD and D/A output (WGA-910A-12).
Capable of checking the operation of the connecting external device by outputting an arbitrary D/A converted
voltage.
The
<Setting Range>
-10V: Outputs -10 V.
0V: Outputs 0 V.
10V: Outputs 10 V.
<How to operate>
1) Press the
2) Press the target key and
MEMO
The current output is 4 mA when 0 V is set.
The current output is 20 mA when 10 V is set.
key is displayed in gray when the optional D/A output board is not connected.
key on the "Operation Check" window.
key to output the target voltage.
95